Aalborg Totalizer Bedienungsanleitung PDF herunterladen (Seite 13)

APPENDIX 1

GLOSSARY

Fm Full scale range in [UNIT/MINUTE] for which your transducer has

been calibrated (usually shown on the front label). If engineering

unit is not minute based it has to be converted. For example 300

SCFH has to be converted to 300/60 = 5 cubic feet/minute.

Fs Full scale range specified in UNIT/SEC.

Vs SCALE FACTOR in kHz which corresponds output frequency for

given flow rate (see Table 2).

D DIVISION FACTOR corresponds division of the output frequency

for particular flow rate (see Table 2).

1 2 ... 8 9 10 11 12 13 14 15 16

Keine Kommentare

Aalborg Totalizer Bedienungsanleitung Seite 13